MPPT1206 MPPT solar controller Belismart

Belismart Tracer series controller adopts MPPT technology (Maximum Power Point Tracking). The advanced tracking algorithm make the solar module operate at ideal voltage which the solar modules can produce the maximum available power. Compared to conventional PWM controller, MPPT technology increase charge efficiency up to 30% and decrease the power of solar array needed.
Tracer has the ability to step-down the higher voltage solar array to recharge a lower voltage battery bank. Max. 150VDC input. So it allows on grid solar modules or thin film modules to charge the off-grid battery. And the cable size can be reduced because of the small current from the solar array.The Tracer series controller is for off-grid solar system and control the charging and discharging of the battery. The controller features a smart tracking algorithm inside that maximizes the energy from the solar PV module(s) and charge the battery. At the same time, the low voltage disconnect function (LVD) will prevent the battery damage from battery over discharging.



Tracer-1206/1210/1215RN System Voltage 12 / 24VDCRated Battery Current 10ARated Load Current 10AMax. PV Input Power 12V System 130W ； 24V System 260W

Key features：
·MPPT technology
·Peak conversion efficiency of 97 %
·High Tracking efficiency of 99%
·Several seconds tracking speed
·Very fast Sweeping of the entire I-V curve
·4- Stage charge with PWM output
·Excellent thermal design and nature air cooling
·Full power output in ambient temperatures up to 45℃
·Temperature compensation function
·Sealed, Gel, Flooded battery type optional
·Diversified load control: Manual, Dusk to Dawn, Dual timer, TEST
·RJ45 interface with optional remote meter
·Standard 2 years warranty
·CE certificate


Technical specifications Electrical Parameters
Description
Parameter
Nominal System Voltage
12VDC / 24VDC Auto work
Rated Battery Current
10A
Maximum Battery Voltage
32V
Max. Solar Input Voltage
Tracer-1206RN 60VDC
Tracer-1210RN 100VDC
Tracer-1215RN 150VDC
Max. PV input power
12V/ 130W
24V /260W
Self-consumption*
<10mA(24V)
Charge Circuit Voltage Drop
≤0.26V
Discharge Circuit Voltage Drop
≤0.15V
Communication
TTL232 / 8pin RJ45


























Environmental parameters
Environmental parameters
Parameter
Working temperature
-35℃ to +55℃
Storage temperature
-35℃to +80℃
Humidity
10%-90% NC
Enclosure
IP30


Mechanical Parameters
Mechanical
Parameter
Dimension
156 x 97 x 68 / mm
Mounting holes
147 x 60 / mm
Mounting hole size
Φ5
Terminal
4mm2
Weight
0.55kg