EPIP602 48V Solar Charge Controller Regulator for Solar Power System with Digital and Symbol Display,Which is the second generation with high quality and reliability. Adds new features and protections using highly advance technology.Provides longer battery life and improved system performance. Sets new standards for reliability and self-diagostics.
STANDARD FEATURES:
Versions available: 30,40,50 or 60 amp
12/24 volt autoselect, negative or positive ground
PWM or ON/OFF series battery charging
State of charge (SOC) battery regulation
Battery Ah setting, boost charging, equalising charging, float charging
Automatic load reconnection, manual load switch
Automatic selection of voltage (24 V / 48 V)
Temperature compensation
LCD display: SOC as a fuel gauge, all system parameters in digital value, system status as symbols
Full circuit protection, electronic fuse
Field adjustable parameters by four buttons
ELECTRONIC PROTECTIONS:
1.Short circuit-solar and load
2.Overload-solar and load
3.Reverse polarity, reverse current at night
4.High voltage disconnect
5.Loads protected from voltage spikes
6.Automatic recovery with all protections
EPIP602 Solar Charge Controller Regulator Data Sheet
Model | EPIP602 30A | EPIP602 40A | EPIP602 50A | EPIP602 60A |
Rated solar input | 30A | 40A | 50A | 60A |
Rated load | 30A | 40A | 50A | 60A |
System voltage | 24 V / 48 V | 24 V / 48 V | 24 V / 48 V | 24 V / 48 V |
Regulation Voltage | 28.8V | |||
Float | 26.8V | |||
Equalization | 29.6V | |||
Load Disconnect | 22.2V | |||
Load Reconnect | 25.2V | |||
Temp.Comp.(mV/K) | -30mV | |||
Self-consumption | Control mode: less than 10mA, LED and LCD display - les than 10mA, total 20mA | |||
Operation temperature: | -35 to +55 |
没有评论:
发表评论