VS3024n 30A solar charge controller Belismart

Rated Current：10A, 20A，30A，40A，50A，60ASystem Voltage：12/24V Auto Work 12/24/36/48V Auto Work
Application :
For off-grid solar system , such as street light, solar home system or small power station etc..

Features:
·32 bit MCU with high speed and high performance
·12 bit A/D high-precision sampling to ensure accuracy
·Excellent EMC design
·Control parameter adjustable
·Nominal system voltage automatic recognition
·High efficient Series PWM charging with temperature compensation
·Use MOSFET as electronic switch, without any mechanical switch
·Widely used, automatically recognize day/night
· Adopt graphics dot-matrix LCD screen and HMI (human-machine interface) with 4 buttons, integrated menu displaying and operation
· Humanized design of browser interface, undertake every operating conveniently
· Full control parameters setting and modification, diversified load control mode
·Gel, Sealed and Flooded battery type option
·Electronic protection: Overheating, over charging, over discharging, overload, and short circuit.
·Reverse protection: any combination of solar module and battery
Model
VS1024N
VS2024N
VS3024N
VS4024N
VS5024N
VS6024N
Rated current
10A
20A
30A
40A
50A
60A
Rated voltage
12V/24V Auto
Terminals
4mm2
10mm2
16mm2
35mm2
35mm2
35mm2
Net Weight
0.2kg
0.4kg
0.7kg
0.9kg
1.2kg
1.3kg
Working temperature
-35℃ - +55℃



Model
VS2048N
VS3048N
VS4048N
VS5048N
VS6048N
Rated current
20A
30A
40A
50A
60A
Rated voltage
12V/24V/36/48V Auto
Terminals
16mm2
35mm2
35mm2
35mm2
35mm2
Net Weight
0.7kg
0.9kg
1.2kg
1.3kg
1.4kg
Working temperature
-20℃ - +55℃
Battery type
Gel
Sealed
Floodeed
Over Voltage Disconnect Voltage
16V
Charging Limit Voltage
15.5V
Over Voltage Reconnect Voltage
15V
Equalize Charging Voltage
NO
14.6V
14.8V
Boost Charging Voltage
14.2V
14.4V
14.6V
Float Charging Voltage
13.8V
Boost Reconnect Charging Voltage
13.2V
Low Voltage Reconnect Voltage
12.6V
Under Voltage Warning Reconnect Voltage
12.2V
Under Voltage Warning Voltage
12V
Low Voltage Disconnect Voltage
11.1V
Discharging Limit Voltage
10.8V
Temperature Compensation Coefficient
(TEMPCO)*
-30mV/℃/12V（25℃ ref）
Grounding
VS＊＊＊＊24N / VS＊＊＊＊48N ：Negative to the ground
Working temperature
-20℃~ +55℃
Storage temperature
-30℃~ +80℃
Enclosure
IP30
Voltage parameters are default value at 25℃, 12V, please use 2X (24V system), 3X (36V system) 4X (48V system)

Tracer-1206RN MPPTSolar controller-New MPPTSolar controller-Belismart.com

Tracer-1206RN MPPTSolar controller-New MPPTSolar controller-Belismart.com
Tracer-1206/1210/1215RN
System Voltage 12 / 24VDC
Rated Battery Current 10A
Rated Load Current 10A
Max. PV Input Power 12V System 130W ； 24V System 260W

  
Key features：
·MPPT technology
·Peak conversion efficiency of 97 %
·High Tracking efficiency of  99%
·Several seconds tracking speed
·Very fast Sweeping of the entire I-V curve
·4- Stage charge with PWM output
·Excellent thermal design and nature air cooling
·Full power output in ambient temperatures up to 45℃
·Temperature compensation function
·Sealed, Gel, Flooded battery type optional
·Diversified load control: Manual, Dusk to Dawn, Dual timer, TEST
·RJ45 interface with optional remote meter
·Standard 2 years warranty
·CE certificate
 

Technical specifications
Electrical Parameters                              
Description Parameter
Nominal System Voltage 12VDC / 24VDC Auto work
Rated Battery Current 10A
Maximum Battery Voltage 32V
Max. Solar Input Voltage Tracer-1206RN   60VDC
Tracer-1210RN   100VDC
Tracer-1215RN   150VDC
Max. PV input power 12V/ 130W
24V /260W
Self-consumption* <10mA(24V)
Charge Circuit Voltage Drop ≤0.26V
Discharge Circuit Voltage Drop ≤0.15V
Communication TTL232 / 8pin RJ45
 
Environmental parameters                                
Environmental  parameters Parameter 
Working temperature -35℃ to +55℃
Storage temperature  -35℃to +80℃
Humidity  10%-90% NC
Enclosure IP30


Mechanical Parameters
Mechanical Parameter
Dimension 156 x 97 x 68 / mm
Mounting holes 147 x 60 / mm
Mounting hole size Φ5
Terminal 4mm2
Weight 0.55kg

Tracer-1206RN MPPTSolar controller-New MPPTSolar controller-Belismart.com

MPPT1206 MPPT solar controller Belismart

Belismart Tracer series controller adopts MPPT technology (Maximum Power Point Tracking). The advanced tracking algorithm make the solar module operate at ideal voltage which the solar modules can produce the maximum available power. Compared to conventional PWM controller, MPPT technology increase charge efficiency up to 30% and decrease the power of solar array needed.
Tracer has the ability to step-down the higher voltage solar array to recharge a lower voltage battery bank. Max. 150VDC input. So it allows on grid solar modules or thin film modules to charge the off-grid battery. And the cable size can be reduced because of the small current from the solar array.The Tracer series controller is for off-grid solar system and control the charging and discharging of the battery. The controller features a smart tracking algorithm inside that maximizes the energy from the solar PV module(s) and charge the battery. At the same time, the low voltage disconnect function (LVD) will prevent the battery damage from battery over discharging.



Tracer-1206/1210/1215RN System Voltage 12 / 24VDCRated Battery Current 10ARated Load Current 10AMax. PV Input Power 12V System 130W ； 24V System 260W

Key features：
·MPPT technology
·Peak conversion efficiency of 97 %
·High Tracking efficiency of 99%
·Several seconds tracking speed
·Very fast Sweeping of the entire I-V curve
·4- Stage charge with PWM output
·Excellent thermal design and nature air cooling
·Full power output in ambient temperatures up to 45℃
·Temperature compensation function
·Sealed, Gel, Flooded battery type optional
·Diversified load control: Manual, Dusk to Dawn, Dual timer, TEST
·RJ45 interface with optional remote meter
·Standard 2 years warranty
·CE certificate


Technical specifications Electrical Parameters
Description
Parameter
Nominal System Voltage
12VDC / 24VDC Auto work
Rated Battery Current
10A
Maximum Battery Voltage
32V
Max. Solar Input Voltage
Tracer-1206RN 60VDC
Tracer-1210RN 100VDC
Tracer-1215RN 150VDC
Max. PV input power
12V/ 130W
24V /260W
Self-consumption*
<10mA(24V)
Charge Circuit Voltage Drop
≤0.26V
Discharge Circuit Voltage Drop
≤0.15V
Communication
TTL232 / 8pin RJ45


























Environmental parameters
Environmental parameters
Parameter
Working temperature
-35℃ to +55℃
Storage temperature
-35℃to +80℃
Humidity
10%-90% NC
Enclosure
IP30


Mechanical Parameters
Mechanical
Parameter
Dimension
156 x 97 x 68 / mm
Mounting holes
147 x 60 / mm
Mounting hole size
Φ5
Terminal
4mm2
Weight
0.55kg

EPIP602(30A-60A) 48V Solar Charge Controllers Regulators-Belismart

Belismart--EPIP602(30A-60A) 48V Solar Charge Controllers Regulators, Code:BLS-EPIP602-48V

---

EPIP602 48V Solar Charge Controller Regulator for Solar Power System with Digital and Symbol Display,Which is the second generation with high quality and reliability. Adds new features and protections using highly advance technology.Provides longer battery life and improved system performance. Sets new standards for reliability and self-diagostics.
STANDARD FEATURES:
Versions available: 30,40,50 or 60 amp
12/24 volt autoselect, negative or positive ground
PWM or ON/OFF series battery charging
State of charge (SOC) battery regulation
Battery Ah setting, boost charging, equalising charging, float charging
Automatic load reconnection, manual load switch
Automatic selection of voltage (24 V / 48 V)
Temperature compensation
LCD display: SOC as a fuel gauge, all system parameters in digital value, system status as symbols
Full circuit protection, electronic fuse
Field adjustable parameters by four buttons
ELECTRONIC PROTECTIONS:
1.Short circuit-solar and load
2.Overload-solar and load
3.Reverse polarity, reverse current at night
4.High voltage disconnect
5.Loads protected from voltage spikes
6.Automatic recovery with all protections
EPIP602 Solar Charge Controller Regulator Data Sheet

Model	EPIP602 30A	EPIP602 40A	EPIP602 50A	EPIP602 60A
Rated solar input	30A	40A	50A	60A
Rated load	30A	40A	50A	60A
System voltage	24 V / 48 V	24 V / 48 V	24 V / 48 V	24 V / 48 V
Regulation Voltage	28.8V
Float	26.8V
Equalization	29.6V
Load Disconnect	22.2V
Load Reconnect	25.2V
Temp.Comp.(mV/K)	-30mV
Self-consumption	Control mode: less than 10mA, LED and LCD display - les than 10mA, total 20mA
Operation temperature:	-35 to +55

Note:values are for 24V. Use 2X for 48V.

http://stores.ebay.com/belismart

BeliSmart sells Solar Charge Controllers,MPPT Charge Controller,home Solar Panel,solar powerinverters,and
solar related products,and Consumer Electronic Accessories,Electronic Products for wholesale and retail.
eBay Store: http://stores.ebay.com/belismart ;  Website:  http://www.belismart.com/ 

BeliSmart -ebay--sells Solar Charge Controllers-MPPT Charge Controller

BeliSmart sells Solar Charge Controllers,MPPT Charge Controller,home Solar Panel,solar powerinverters,and
solar related products,and Consumer Electronic Accessories,Electronic Products for wholesale and retail.
eBay Store: http://stores.ebay.com/belismart ;  Website:  http://www.belismart.com/ 

Solar Charge Controller CMP12-belismart! CMP12.wmv

Solar Charge Controller CMP12-belismart!free shipping ,Only USD$9.45

CMP12/24 10A Solar Charge Controller Package:1.Uers` Manual2.10A 12/24V Solar Regulator
Introduction:A solar charge controller is the controlling center of the PV battery in off-grid power system which makes use of solar cells array to protect your batteries from being over-charge and over-discharge, so the life span of it can be extended.

Features:Function：According to the voltage of battery, Solar charge controller will adjust the charging current and decide if to supply power to the loads.1. Generally keep the battery on full voltage condition. 2. Prevent the battery from over-charging.3. Prevent the battery from over-discharging. 4. Prevent the battery from supplying power to solar panels during nights. Output voltage:12V 24V auto switch Max load current: ≤12A Full charge cut:13.7VLow voltage cut:10.5VTemp ompensation:-3mv/℃/cellZero Load Loses:≤20mAVoltage Drop:<160mv

This is the OEM of CMP12,maked CMP12/24.It`s 10A charge controller,ideals for 12V and 24V solar system. This item we have three warehouses worldwide(China,Australia,United Kingdom),Please choose the item location.From Australia To Australia: 2-3 work days.From UK to UK:2-3 work days.To European coutries: 5-8 work days.From China to worldwide:10-30days.

Solar Charge Controller CMP12-belismart.avi

http://youtu.be/bCvVDmTvKOE
Solar Charge Controller CMP12-belismart!free shipping ,Only USD$9.45

60W Solar Power Inverters,Power Products--belismart

60W Solar Power Inverters,Solar Power, 60w solar power system ,Home solar Power
60W Solar Power Inverters,Power Products--belismart

The Modified sine wave inverter Juta W-180(60 Watt) can transform the electrical energy of 12V direct current into the energy of 230V alternating current that can be used in appliances, such as TV, acoustics, fax machine, haircut appliances, etc.
Other functions: overload protection, short circuit protection, battery reverse link protection, temperature protection and so on. 

The functions of protection:
1. Overloading protection: When insert too many appliances and the total power loads, the converter will stop working within ten seconds. Then the red indicator lamp will get light and the converter will be fixed on the protection state. Until reduce the load, turn the on-off of the power to the “OFF” over ten seconds and turn the on-off to the “ON”, then the converter will renew to work;
2. Short circuit protection: When the interior of the appliance starts short circuit, the converter will stop working within one second and be fixed on the protection state. Till take the appliance away, turn the on-off to the “OFF” over ten seconds and turn it to the “ON”, then the converter will renew to work;
3. Temperature protection: When the load is too much or the temperature is too high, the temperature in the interior of the converter will get higher. When the temperature gets to 90℃, the converter will stop working and be fixed on the protection state. Till you turn the on-off to the “OFF” after reducing the load or improving the ventilation condition and turn the switch “on-off ” to the “ON” after the interior temperature gets lower, then the converter will renew to work.

60W Solar Power Inverters,Solar Power, 60w solar power system ,Home solar Power

60W Solar Power Inverters--Belismart

The Modified sine wave inverter Juta W-180(60 Watt) can transform the electrical energy of 12V direct current into the energy of 230V alternating current that can be used in appliances, such as TV, acoustics, fax machine, haircut appliances, etc.Other functions: overload protection, short circuit protection, battery reverse link protection, temperature protection and so on. The functions of protection:1. Overloading protection: When insert too many appliances and the total power loads, the converter will stop working within ten seconds. Then the red indicator lamp will get light and the converter will be fixed on the protection state. Until reduce the load, turn the on-off of the power to the “OFF” over ten seconds and turn the on-off to the “ON”, then the converter will renew to work;2. Short circuit protection: When the interior of the appliance starts short circuit, the converter will stop working within one second and be fixed on the protection state. Till take the appliance away, turn the on-off to the “OFF” over ten seconds and turn it to the “ON”, then the converter will renew to work;3. Temperature protection: When the load is too much or the temperature is too high, the temperature in the interior of the converter will get higher. When the temperature gets to 90℃, the converter will stop working and be fixed on the protection state. Till you turn the on-off to the “OFF” after reducing the load or improving the ventilation condition and turn the switch “on-off ” to the “ON” after the interior temperature gets lower, then the converter will renew to work.
Juta W-180(600W) Solar power inverters Data Sheet